#############################
# ENGLISH.HLP for FBB 5.14c #
#    by LA6CU 14/6/92       #
#############################
##############################################################################
# Changed in 5.14c:  Command H (letter) is replaced by ? (letter).  H alone
# is still OK.
# In Gateway, B (Bye) is replaced by Q (Quit).
#############################################################################
@@ -1 ?

You have only a limited set of commands :

H  : Read this help-text.
KM : KILL all messages to you, that you have read.
LM : LIST all messages to you.
O  : Choose "options" (language, paging).
RM : Read all messages to you.
RN : Read all NEW messages to you.
S  : SEND a message.
T  : "Talk" to sysop.
B  : Bye (disconnect).

@@ 0 ?

*** That command is not available here !!

Available commands are :

C : Connections - statistics.
D : Documentation.
N : Call-book (nomenclature).
Q : Qth-locator (calculations etc).
T : Satellites, trajectory
F : Return to BBS mode.
B : Disconnect.

Press ? [LETTER] for more detailed information on one special command.

@@ 0 C

CONNECTIONS - STATISITICS
-------------------------

Here you can get statistical information on the use of this BBS.

@@ 0 D

DOCUMENTATION
-------------

Here you can get information and documentation of various kind.  
The commands are numerical.

@@ 0 N

CALL-BOOK (NOMENCLATURE)
------------------------

In this module you will find any information that users have wanted to
leave : Surname, first-name, address, telephone, etc ...

You can enter your own information in the same way.

@@ 0 Q

QTH LOCATOR
-----------
The QTH Locator describes one geographical position.  This is done with a 
succession of 2 letters, 2 numbers and 2 letters.  Example: JP20QI 

You can change a QTH-locator into longitude and latitude, or vice-versa,
calculate the distances and headings between two QTH-locators, or calculate
your contest scores (cumulative distances).

@@ 0 T

SATELLITE TRAJECTORY
--------------------
Trajectory calculator, orbital parameters and the charactaristics of several
amateur satellites.

@@ 0 F

RETURN TO BBS-MODE.
-------------------

With this command you can return to BBS-mode.

@@ 0 B

DISCONNECT.
-----------

With this command you can log off the BBS directly, without going back to
BBS-mode first.

@@ 2 ?

*** That command is not available here !!

Available commands are :

C : Sum the distances between a point and several QTH-locators.
D : Calculate distance and heading between two QTH-locators.
L : Change longitude and latitude into QTH-locator.
Q : Change QTH-locator into longitude and latitude.
F : Return to server menu.
B : Disconnect.

Press ? [LETTER] for more detailed information on one special command.

@@ 2 Q

Command  Q : Change a QTH Locator into longitude and latitude. The
             longitude and latitude are given in degrees/minutes and
             in gradians.

@@ 2 L

Command  L : Change Longitude and Latitude into a QTH Locator. The
             longitude and latitude can be entered in degrees and
             hundredths, degrees and minutes, or in gradians.

             Correct format must be used:
    
             Degrees     :  1:45:00 (direction)
             Gradians    :  1.5 (direction)

             where [direction] must be replaced by North, South, East or
             West.  Remember to use CAPITAL letter as first letter !   

@@ 2 D

Command  D : Calculate the distance and heading between two QTH locators.
             The distance is given in Km and the heading in degrees.

@@ 2 C

Command  C : Sum of calculated distances. Having entered the QTH-Locator,
             which serves as the origin for the calculations, you could
             give a destination QTH-locator. The calculated distance 
             could be summed with a second or several other calculations.
             It permits you to calculate the total number of Km.
             Distances shorter than 1 km is given 1 point in the 
             calculations.

@@ 2 F

Command F :
-----------

With this command you can go back to server-menu, and continue from there.
If you want to leave server-mode, you can press F once more.

@@ 2 B

Command B :
-----------

With this command you can log off from the BBS without going back to BBS-
mode first.

@@ 3 ?

*** That command is not available here !!

Available commands are :

G : General statistics.
H : Graphic display of use pr hour.
I : List of callsigns that have used this BBS. 
J : Graphic display of use pr day.
L : Detailed list of connected stations (can be aborted by the A-command).
O : Use of mailbox and servers (percentages).
F : Return to server menu.
B : Disconnect.

Press ? [LETTER] for more detailed information on one special command.

@@ 3 O

Command  O : Shows the usage of mailbox and servers (percentage),  and also 
             the usage of each server individually.
             
@@ 3 G

Command  G : General statistics about the server:
             - Number of active messages.
             - Number of connections in this BBS.
             - Average time pr connect.
             - Average number of connects pr day.
             - High-traffic hours.
             
@@ 3 L
        
Command  L : Show detailed information on each connect:
             
             - Port (A, B etc)
             - Channel-number
             - Number of each connect (starting from 1)
             - Callsign
             - Date
             - Time (start of connection)
             - Number of minutes and seconds for the connect
             
The list is shown in revers chronological order, and can be aborted with the
A-command.              

@@ 3 H

H         : Graphic display of mailbox-usage each hour.
H [call]  : Graphic display of usage of a callsign. "Wildcards" are 
            allowed here.  For example:
H W*      : Gives a graphic display of usage from all W-stations.
             

@@ 3 J

J         : Graphic display of daily total use of the mailbox.
J [call]  : Graphic display for a callsign. "Wildcards" are allowed here.
            For example:
J W*      : Gives graphic display of usage from all W-stations.
          

@@ 3 I

I          : List all callsigns that have used this mailbox.
             The list is sorted in alphabetical order.  "Wildcards" are
             allowed, for example:
I W*       : Gives a list of all W-stations.            
             
@@ 3 F

Command F :
-----------

With this command you can go back to server-menu, and continue from there.
If you want to leave server-mode, you can press F once more.

@@ 3 B

Command B :
-----------

With this command you can log off from the BBS without going back to BBS-
mode first.

@@ 4 H

DOCUMENTATION:
--------------
To read a file from the list, just type the number for the file.
New files are entered with the NEWDOC-server in BBS-mode.  Get help for
this in BBS-mode (? NEWDOC).

Send L to see the list of files.

Sysop:  DESCRIPTION can be changed with the D-command:
D BBS.DOC Description

Press ? [LETTER] for more detailed information on one special command.


@@ 4 F

Command F :
-----------

With this command you can go back to server-menu, and continue from there.
If you want to leave server-mode, you can press F once more.

@@ 4 B

Command B :
-----------

With this command you can log off from the BBS without going back to BBS-
mode first.

@@ 4 D

Command D (only for sysop) :
----------------------------

Sysop can use this command to edit the description of a file.  Command
D (filename) (description)

@@ 4 L

Command L :
-----------

Use this command to see list of available files.


@@ 4 R

Command R :
-----------

If you have moved to a sub-directory of DOCS, use R to return to previous
directory-level.

@@ 5 ?

*** That command is not available here !!

Available commands are :

I : List of callsigns that have connected.
N : Change your name and address details, telephone-number and QTH-loc.
R : Search for information on a user.
F : Return to server menu.
B : Disconnect.

Press ? [LETTER] for more detailed information on one special command.

@@ 5 N

Command  N : Change your surname and address. If the entries in the address
             file are incorrect or they have changed, you can change them   
             with this command. A <space> or <return> in response to the
             question will not modify the contents. If the contents of the
             file are correct, you stop the changes by replying N to the 
             Change (Y/N) question.
###########################################################################
# New in 5.14c:
For SYSOP  : Sysop can change user-data with command N (callsign).
###########################################################################


@@ 5 R

Command  R : Search for informations on a user. You can send R alone, then 
             the BBS will prompt you for a callsign, or you can send
             R [callsign] directly.  
             Example: R LA6CU

@@ 5 I

Command  I : List of the callsigns that have connected to the BBS. This
             is in alphabetical order.

@@ 5 F

Command F :
-----------

With this command you can go back to server-menu, and continue from there.
If you want to leave server-mode, you can press F once more.

@@ 5 B

Command B :
-----------

With this command you can log off from the BBS without going back to BBS-
mode first.

@@ 6 ?

*** That command is not available here !!

Available commands are :

C : Charactaristics of amateur satellites.
P : Obtain the orbital parameters.
T : Calculate the trajectory of a satellite.
F : Return to server menu.
B : Disconnect.

After commands C, P and T send L for list of satellites.

Press ? [LETTER] for more detailed information on one special command.


@@ 6 T

Command  T : Calculate a satellite's trajectory. After choosing the satellite
             for which you want the trajectory, you have to enter the date and
             time from which the calculations start. The geographical position
             is the QTH-locator of the connected station, if it is in the
             file, else the QTH-locator of the server will be used by default.
             Following the satellites, the calculated pass could be variable,
             and a line of parameters will be displayed each pass. This
             calculated line corresponds to a minimum elevation of -5 yourees,
             when the satellite is 5 youress below the horizon.

             After command T send L for list of satellites.

@@ 6 P

Command  P : Display the orbital parameters of the selected satellite. These
             parameters are used for the calculations.

             After command P send L for list of satellites.

@@ 6 C

Command  C : Characteristics and information on the selected satellite.

             After command C send L for list of satellites.


@@ 6 F

Command F :
-----------

With this command you can go back to server-menu, and continue from there.
If you want to leave server-mode, you can press F once more.

@@ 6 B

Command B :
-----------

With this command you can log off from the BBS without going back to BBS-
mode first.

@@ 9 ?

#############################################################################
# New in FBB 5.13e 
Available commands in FBBDOS are:

? and HELP          -  This help-text.
O                   -  Options (paging, base-number etc)
DIR                 -  Show directory-listing.
EDIT                -  Edit a file.
GET                 -  Download an ASCII file from the BBS.
PUT                 -  Upload an ASCII file to the BBS.
CD                  -  Change Directory.
MD and MKDIR        -  Make Directory.
COPY                -  Copy a file.
DEL                 -  Delete a file.
RD and RMDIR        -  Remove a Directory.
TYPE                -  Download an ASCII-file with paging.
YGET and XGET       -  Download a binary file with Yapp (Y) or XMODEM (X)
YPUT and XPUT       -  Upload a binary file with Yapp (Y) or XMODEM (X)
LIST                -  Show directory-listing WITH labels (if available).
PRIV                -  Go to a special directory (private...).
VIEW                -  See contents of .ZIP. .ARC and .LZH-files.
############################################################################
# New in FBB 5.13e
NEW                 -  See all new files since last NEW-command.
############################################################################
EXIT, F and QUIT    -  Return to BBS-mode.
B                   -  Disconnect.
###########################################################################
# New in 5.14c:
You can go from one disk to another (like in MSDOS) with commands A: or 
C: etc if the BBS uses more than one (physical or virtual) disk.
############################################################################


For more detailed help with one command, type 
? (command)
#############################################################################

@@ 9 HELP

Command "HELP":
---------------
Command "HELP" shows all available commands under FBBDOS.

@@ 9 B

Command "B":
------------
Logs off the BBS directly (disconnects).

@@ 9 CD

Command "CD":
-------------
Command "CD" is used (like in DOS) to change directory.
Example:  CD \TEST

"CD .." is used to go back to the previous directory-level.


@@ 9 COPY

Command "COPY":
---------------
COPY-command is for copying files.  If the filename already is used, the old
file will be over-written.

Example:   COPY TOTO.TXT TEST.TXT

@@ 9 DEL

Command "DEL":
--------------
DEL-command is for deleting files.  You can only delete files that YOU have
uploaded, only SYSOP can delete other users' files.

@@ 9 DIR

Command "DIR":
--------------
DIR-command shows the contents of the present directory.  DIR can also
use a path, like: DIR \TEST   Wildcards are also allowed here, like:
DIR *.SYS

@@ 9 DOS

SYSOP can now run DOS-programs from remote.  Sysop must be in FBBDOS and 
send the command 
DOS [program] [parametre]
Output from that program will go back to the sysop.  The program cannot take
any input from sysop after it has started.  If anything goes wrong in the
task the DOS-program is run, the task will be shut down after 3 minutes and
the BBS will continue to work as before.

@@ 9 EDIT

Command "EDIT":
---------------
       This command is used for editing text-files in this BBS.
       
       Here are the available commands:

   ? : Shows all commands that can be used in the editor.

   A : Adds a line after the current line.  The text for the new line
       shall follow the letter A.  If more commands are to follow after
       the text, the text must be ended with a "/" before next command.  If 
       the sign "/" itself is to used in the text, a "\" must be written 
       just before the "/".  If again the "\" is to be used inside the text
       as a valid character, it must be written twice ("\\").  
       The pointer will be at the start of the new line.
       
   B : Go to start of file.
   
   E : Go to end of file.

   F : Search for the first occurrence of a character (or string of 
       characters) in the file.  The search starts at the current line.
       The string of characters must be ended with a "/" if more commands
       are chained (se the paragraph on the A-command).
       
   I : Insert a line before the current line.  Read about ending with a
       "/" in the paragraph on the A-command.

   K : Delete the number of lines that are stated just before the letter K.
       Example:  3K
       If no number is used, then 1 line is deleted.
       
   L : Move a number of lines from the current line.  The number can be 
       negative to move towards the start of the file.
       Examples:  5L   -10L
       
   N : Toggle line-numbering on/off.

   P : Show a number of lines from the current line.  Example 8P.  This
       will show 8 lines, starting with the current line.
       
   R : Search and replace.  Search for a string of characters and replace it
       with a new one.  Example:  RALL/ALLE  will replace all ALL with ALLE
       from the current line to the end of the file.  
       
   S : Save file.

   Q : Exit the editor without saving the file.

   Examples::

       "EDIT>B5L10P" sets pointer at start of file.  Move 5 lines down, and
                     show 10 lines from there.
                     
       "EDIT>B4L6K-2L1OP" sets the pointer to the start of file.  Move down
                     4 lines.  Delete 6 lines.  Move back 2 lines, and show
                     10 lines.
                     
       "EDIT>BFBonjour/K-2L5P" sets the pointer to the start of file,
                     searches for "Bonjour", deletes the line containing
                     "Bonjour",  moves back 2 lines and shows 5 lines.
                     
       "EDIT>BFBonjour/IC'est une nouvelle ligne avec un \/ dedans/-1L3P"
                     sets the pointer to start of file.   Searches for
                     "Bonjour", inserts the new line.  The new line also
                     contains the character "/".  Goes back 1 line and
                     shows 3 lines.
                     
       "EDIT>SQ"     save file and quit the editor.
       
@@ 9 EXIT|QUIT|F

Commands "EXIT", "QUIT", "F".
-----------------------------
Leave FBBDOS and return to BBS-mode.

@@ 9 GET

Command "GET":
--------------
Use this command to download an ASCII-file from the BBS without paging.
Example:GET NORSK.MAN

@@ 9 LIST

Command "LIST":
---------------
Lists files (also ASCII-files) in the same manner as YI lists YAPP-files 
with labels.

@@ 9 MD|MKDIR

Commands "MD" or "MKDIR":
-------------------------
Use this command to make a new directory.
Example: MD TEST

@@ 9 NEW

############################################################################
# New in FBB 5.13e
Command "NEW":
--------------
List all new files, in all available directories, that have arrived since 
you last sent NEW.
############################################################################

@@ 9 O|OL|ON|OR|OP

Command "O".
------------
O-command gives you different options:
O alone shows you what language you are using, paging and base-number.
- Type OP to toggle paging on messages.
- Type OP [number-of-lines] to select paging with a specific number of
  lines per page.
- Type OL alone to get a list of available languages.
- Type OL[space][language-number] to choose a language.
- Type ON alone to see your base-number.
- Type ON [number] to choose a new base-number.  The number you type, will
  be multiplied by 1000, so if you type ON 54, your base-number will be 54000.
  After that, you can type R 25 to read message number 6025.
############################################################################
# New in FBB 5.13f:  ONx1000 allowed
  It is also allowed to type ON 54000.
############################################################################
#############################################################################
# New in 5.13f :
- Type OR to choose if you want to list/read all personal messages in the BBS.
############################################################################
############################################################################
# New in 5.14c:
- Type OM to choose if you want to receive the list of new messages at 
  every connect.
############################################################################



@@ 9 PUT

Command "PUT":
--------------
Use this command to upload an ASCII-file to the BBS.  If the filename
############################################################################
# New i FBB 5.13f:  Cannot overwrite !
exists, the file will not be over-written !  You must delete it first.
############################################################################
However, you cannot delete files that have been uploaded by other users, you
can only write over your "own" files.
Example: "PUT TEST.TXT"

@@ 9 PRIV

Command PRIV
------------
PRIV is a special command in FBBDOS.  It gives authorized users access
to a special directory.   All users can be authorized, not only sysops..

@@ 9 RD|RMDIR

Commands "RD" or "RMDIR":
-------------------------
Remove a directory with this command.  You can only remove empty directories,
and anly if YOU have created that directory.

@@ 9 TYPE

Command "TYPE":
---------------
Use this command to download a file from the BBS, using paging.  (That is;
if you also use paging in BBS-mode...).

@@ 9 VIEW

Command "VIEW".
---------------
Use this command to see the contents of archived files, like *.ZIP. *.LZH.
*.ARC etc.  Use it like this:  VIEW filename.ext

@@ 9 XGET

Command "XGET":
--------------
This command is used for nownloading files with the XMODEM-protocole.  This
works only on telephone-modem port on the BBS.
Example: "XGET FICHIER.EXE" 
##############################################################################
# New in 5.14c:
You can resume a download from the point you last stopped, by command
XGET (filename) (offset).  Example: XGET FICHIER.EXE 150000 starts download 
from byte 150000.  The files can later be put together to 1 with the program
called CUT.
##############################################################################

@@ 9 XPUT

Command "XPUT":
---------------
This command is used for uploading files with the XMODEM-protocole.  This 
works only on telephone-modem port on the BBS.
Example:  "XPUT TEST.EXE"

@@ 9 YGET

Command "YGET":
--------------
This command is used for nownloading files with the YAPP-protocole.  
Example: "YGET FICHIER.EXE" 

@@ 9 YPUT

Command "YPUT":
---------------
This command is used for uploading files with the YAPP-protocole.
Example:  "YPUT TEST.EXE"

@@ 14 ?

- Type ? [COMMAND] for HJELP with a command.
Examples:
 - type ? H for a list of all the most important commands.
 - type ? O for help on available options (languages, paging etc).
   (Paging is toggled on/off with OP-command)
 - Type ? REQDIR or ? REQFIL for help on these servers.
Remember to press <Enter> or <Return> after each command (hi).

X toggles your status between EXPERT and NORMAL user.
A can be used to abort listings.
I shows information about this system.
Last used message-number can be repeated with the use of the #-character.
Example:  R 1235.  Next command: K #

For SYSOP:  Overview of all commands for sysop with ? SYSOP. 
            Overview of all the function-keys with ? FUNCTION.

@@ 14 A|ABORT

In the middle of a long listing from the BBS, you can send the command
A (ABORT) to stop the listing.  The listing will stop after a short while, 
and the BBS will ask you if you want to read some of these messages
(listing continues after reading the messages), if you want to continue
listing messages, or if you want to stop all listing.  If so, the normal
BBS-prompt will return.
A can also be used many other places, for example when downloading long
ASCII-files.

@@ 14 ACK

By typing 
/ACK
in the first column of a line in a message, you will receive an acknowledge-
message from the receiver-BBS when the message arrives there.  This works
ONLY in FBB-BBSs.

@@ 14 B

The "B" command logs you off the PBBS and disconnects you.
- Type "B"  to LOG OFF gracefully [Bye].
Be sure to hit <Enter> or <Return> after each command.
NOTE: You may also LOG OFF by disconnecting.

@@ 14 C|CW

- The "CW" command lists the call-signs in conference.
- The "C" command lets you enter in conference.

In conference, all commands must begin by a point on first column.
The commands are :

.C[port] CALL-SIGN [V REPEAT ...] connects a call-sign on a port.
.D  disconnects a user from the conference.
.H  gives you this help file.
.W  lists the call-signs in conference.
.Q  lets you leave the conference.

@@ 14 D|DOS|DOWNLOAD

D-command has 2 different functions.

1) If you send D [filename], the mailbox will send you the file with that
   name.  This file must be in the root-directory for users.  If the
   file is in a subdirectory, you must use fulle path, like this:
   D VHF/VHF.DX
   See also help with the W-command (? W).
   
2) If you send the letter D alone, you will enter FBBDOS.  The commands in
   FBBDOS are very similar to those of MS-DOS.  Users have access to a part
   of the BBS's hard-disk in FBBDOS.  Following commands are allowed here:
   
   ?  HELP         >=  Use one of these to get help.
   DIR             >=  List files in this directory.
   MD MKDIR [name] >=  Use one of these to make a new directory.
   RD RMDIR [name] >=  Use one of these to remove a directory.  You cannot
                       be in the directory you want to remove, and the
                       directory must be empty.  
   CD [name]       >=  Use CD to change directory.
   COPY [from] [to]>=  Copy a file named [from] to a file named [to].
                       Can also be used to copy between directories.
   DEL [filename]  >=  Deletes the file [filename].
   TYPE [filename] >=  Download the ASCII-file [filename] from the BBS.  The 
                       file is divided into pages, if you use paging when
                       in BBS-mode.  The file must be in your current
                       directory.
   GET  [filename] >=  Identical to TYPE, but always without paging, and the
                       file is always ended with a CTRL-Z.
   PUT [filename]  >=  Use this command to upload an ASCII-fil to this
                       directory.
   YPUT and YGET   >=  These are identical to PUT and GET, but uses the 
                       YAPP-protocole for binary transfer.
   XPUT and XGET   >=  These are identical to YPUT and YGET, but uses the
                       XMODEM-protocole for binary transfer.  Only for
                       telephone-modem.
   EDIT [filename] >=  This is a small editor for editing texts and files
                       in the BBS.  You can use this editor ONLY on files
                       that YOU have uploaded to the BBS.  Get more info
                       with ? EDIT
   F B EXIT QUIT   >=  Use one of these to go back from FBBDOS to BBS-mode.
   O               >=  Use this to set "options" like in BBS-mode.
   LIST            >=  Same as DIR, but shows also descriptions of files, if
                       users have provided such an description..
   PRIV            >=  Gives special users access to a special directory.
   VIEW            >=  See the contents of an archived file like *.ZIP, *.LZH 
                       etc.           VIEW filename.ext
   NEW             >=  List all new files since you last sent NEW
   
@@ 14 E|EU

This command is only for sysop and remote-sysop.
EU [callsign]  to edit a user.
E [msg#]       to edit a message.

@@ 14 F

F - command gives you access to SERVER-mode and special commands.
    In  "server-mode" you can do several things:
    Get statistics of the use of this mailbox.
    Read documentation of different kind.
    Read info on all users of this mailbox.
    Calculate QTH-locatorer and distances between several QTH-loactors.
    Calculate trajectory of different sattellites.
    
For more information, type ? when you have entered SERVER-mode.  For 
detailed information, type ? [command].

@@ 14 FUNCTION

Here is an overview of all function-keys:

F1     -  General help on all function-keys.
F2     -  Connect to the BBS locally with the console-callsign.
F3     -  Disconnect a channel.
F4     -  Start or stop forwarding.
F5     -  Toggle monitoring on/off.  With monitor on, the lower part of
          the screen displays the monitored traffic, while the upper part of
          the screen shows traffic in the BBS.  Number of lines in upper/lower
          part of the screen, can be adjusted with the arrow-up or arrow-down
          keys.
F6     -  Change console-callsign.  That callsign is used when connecting to
          the BBS with F2.  The callsign have sysop-status.
F7     -  Program TNC directly.
F8     -  Reboot PC.  Can be done at once, or when all channels are free.
F9     -  Gateway, using console-callsign.
F10    -  Talk to a user (that have sent a T) or initiate a chat with a user.

ALT-F1 -  Shows pending forward(s).  Shows number of personal messages,
          bulletins, and the total amount of kB waiting to be forwarded.
ALT-F2 -  Shows all callsigns connected to the BBS.
############################################################################
# New in 5.13e: Start
ALT-F3 -  Start or stop forward-scan.
############################################################################
ALT-F4 -  Shows the last connected callsigns.
ALT-F5 -  Starts a very simpel text-editor (use F1 for help there).
ALT-F6 -  Various "options" :  Sysop is inn ?
                               Beep at connect ?
                               Show callsigns etc. on every channel ?
                               Gateway allowed ?
                               Justification ?
ALT-F7 -  Import messages from file.
ALT-F8 -  Export messages to file.  Messages that are waiting to be 
          forwarded to one BBS.  These messages can be forwarded to a file.
ALT-F9 -  Exit to DOS.  The BBS is halted during that time.
ALT-F10-  Stop the mailbox-program.  Can be done at once, or when all 
          channels are clear.

CTRL-F1 to CTRL-F10 holds pre-defined texts, that are sent when pressing
          that key.  The texts are in the file MEMO.SYS.

@@ 14 G|GATEWAY

G - command gives you access to the GATEWAY (if the BBS allows gateway, and
    if there is a channel available on the gateway-port).
    
@@ 14 H|HELP

List of available commands :
A : Abort      - Abort listing.
B : Bye        - Log off the BBS.
C : Conference - Access to conference.
D : DOS        - Access to FBBDOS, or to download a file.
F : FBB        - Access to server mode.
G : Gateway    - Access to other frequences by 'gateway'.
H : Help       - Help.
I : Info       - Information about the system.
J : Jheard     - List of the last few connected stations.
K : Kill       - Kill messages.
L : List       - List messages.
M : Make       - Copy a message to a file.
N : Name       - Change your name.
##############################################################################
# New in 5.13 e
NZ: Zip        - State your zip-code.
NH: homeBBS    - Type your home-BBS.
##############################################################################
O : Option     - Select options (paging, language, list/read personal etc).
##############################################################################
# New in i 5.13 e
PS: Servers    - Show which servers are available in this BBS.
PG: Program    - Run (show) certain DOS-programs.
##############################################################################
R : Read       - Read messages.
S : Send       - Send messages.
T : Talk       - Talk to SysOp.
U : Upload     - Upload a file to the BBS.
V : Verbose    - Verbose read of messages (like R, but with forwarding 
                 headers).
W : What       - Which files are available.
X : Expert     - Change between Normal and Expert.
Y : Yapp       - Transfer binary files with the Yapp transfer protocol.
##############################################################################
# Ny i FBB 5.13f:
Z : Delete     - Delete a file.
##############################################################################
+ : Append     - Only for sysops:  Append a file after a message.
> : Send text  - To send a text to another station connected to the BBS.
= : Connect    - To connect another station connected to the BBS.
! : Info       - Short version of the I-command.
$$ : Forwardet  - Only for sysop: Show what BBSs that will receive, or 
                 already have rceived a message.
* : Wildcard   - Many possibilities, like @,?,#,=,*                 

For detailed help on each command, type ? [command].

@@ 14 I|INFO|I@|ID|IZ|

I             - Gives you information about this BBS.
I  [callsign] - Gives WP informations about [callsign]
I@ [bbs]      - Gives the known users of [bbs]
ID            - Gives some statistics on WP.
IZ [zip]      - Searches for [zip] in WP.

PS : Willcards are allowed.

@@ 14 J|JA|JB|J1|J2|JK

J-command sends you a list of the last connected stations.
- Type JK to see the last connected stations.
- Type JA to see callsigns that have connected to TNC-A.
- Type J1 to see callsigns that have been MONITORED on TNC-A.
- Type JB to see callsigns that have connected to TNC-B.
- Type J2 to see callsigns that have been MONITORED on TNC-B.
  and so on...

@@ 14 K|KILL|KM|KK

K-command is for killing messages TO or FROM you.
- Type K[space][message#] to delete one special message.
- Type KM to delete all messages to you, that you have read [Kill Mine].
  This command will NOT kill messages that you have not read !
  
PS :    You cannot delete messages that are not TO you or FROM you, only 
        SYSOP can dio that..
     
SYSOP:  In front of K-commands, you can put an extra K, like KKM, KKF etc.
        In that manner the messages will get A-status (normally K) at once.

@@ 14 L|LIST|LB|LM|LN|LL|LS|L<|L>|L@|LU|LR|LC|LD>|LD<

L-command LISTS all messages in the mailbox.
  L  lists all new messages since you last issued a L-command.
  LB lists only bulletins.
  LC for very special listings.  See further down..
  LM lists all messages TO YOU [List Mine].
  LN lists all UNREAD messages to you [List New].
  LL 10 lists the last 10 messages in the mailboxen [List Last].
  LS [Text] lists messages with [text] in the subject.
  L< [callsign] lists messages FROM [callsign].
  L> [callsign] lists messages TO [callsign].
############################################################################
# New in FBB 5.13f:
  L@ lists local bulletins with no @BBS-field.
############################################################################  
  L@ [callsign] lists messages @[callsign].
  L  [message#]- lists ONLY messages with higher number than [messages#].
  L  [message#]-[message#] lists all messages between these numbers.
  LU lists all UNREAD messages (status N) to and from you.
  LR lists messages in revers order, starting with the oldest one.
     LR can replace L in most contexts (ex: LR 1-100)

Examples:
- To list messages over #325, type L 325-
- To list messages from #300 to #350, type L 300-350

PS:  Check number of active messages before doing a list-command, to avoid
     listing every messages in the system.  This is easy to check with the
     V-command.

Special command LC:
With this command you can have very special listings.  If you once type
LC DX, then all list-command (except LM and LN) will only list messages
with a TO-field of DX.  If you type LC *DX*, listings will contain all
to-fields that have DX in it, for example VHFDX, DXHF etc.  To go back
to "normal", send LC *
#############################################################################
#New in FBB 5.14c:
LC * or LC ; gives a list of available LC-fileds.
#############################################################################  

#############################################################################
# New in FBB 5.13f:  M overwrites, MA appends
@@ 14 M|MH|MV|MA|MVA|MHA

M [number] [name]  :  Copy a message to file.            
MH [number] [name] :  Same, but in same format as R (msg#).
MV [number] [name] :  Same, but in same format as V (msg#).
These commands will overwrite old messages.

MA [number] [name] :  Copy a message to file.            
MHA [number] [name]:  Same, but in same format as R (msg#).
MVA [number] [name]:  Same, but in same format as V (msg#).
These commands do NOT overwrite old messages, but append the next text to
the old file.

#########################################################################
Only for sysops;  M can be used instead of L.  The listing then will have
                  the BID included in the subject.

@@ 14 N|NAME

N-command is used to enter (or later change) your name in the BBS.  You
can use max 12 characters.  "Phoney" names will be deleted, use your own
first-name.

- Type N[space][first-name]

##########################################################################
# New in 5.13f:
@@ 14 NH|HOMEBBS

Use this command to state your home-BBS.
###########################################################################

@@ 14 NP

This command is for changing your password for access to the modem-port.

@@ 14 NQ

Use this command to enter (or change) your QTH-locator.

@@ 14 NEWDOC

NEWDOC is a server for entering new information/documentation in the DOCS-
server.  To enter a file here, send a personal message like this:

SP NEWDOC @ (bbs)

The subject must hold 2 things:  First it must contain the filename,
complete with path (if needed), followed by a label that describes the file.
Like this:

BBS.DOC Documentation for this BBS.

The message will then become the file.  After you have sent such a message
using NEWDOC, the BBS will send you a message to confirm that the file
was successfully saved under DOCS.

Sysop can change the label with command L in DOCS-server.

##########################################################################
# New in 5.13f:
@@ 14 NZ|ZIP

Use this command to state your ZIP-code.
###########################################################################

@@ 14 O|OP|OR|OL|ON

O-command gives you different options:
O alone shows you what language you are using, paging and base-number.
- Type OP to toggle paging on messages.
- Type OP [number-of-lines] to select paging with a specific number of
  lines per page.
- Type OL alone to get a list of available languages.
- Type OL[space][language-number] to choose a language.
- Type ON alone to see your base-number.
- Type ON [number] to choose a new base-number.  The number you type, will
  be multiplied by 1000, so if you type ON 54, your base-number will be 54000.
  After that, you can type R 25 to read message number 54025.
############################################################################
# New in FBB 5.13f:  ONx1000 allowed
  It is also allowed to type ON 54000.
############################################################################
#############################################################################
# New in 5.13f :
- Type OR to choose if you want to be able to list and read all personal 
  messages in the BBS (if your BBS allows this...).
############################################################################
############################################################################
# New in 5.14c:
- Type OM to choose if you want to receive the list of new messages at 
  every connect.
############################################################################

@@ 14 P|PR

Only for sysops:  Use PR to toggle printer on/off.

@@ 14 PS

Use this command (PS) to see which servers are available in this BBS.

#############################################################################
# New in FBB 5.13 
@@ 14 PG

Send command PG to list available DOS-programs.  Run one DOS-program with
command   
PG (program-name) (parametre)
#############################################################################

@@ 14 R|RM|RN|RU|R>|R<

R-command is for reading messages (not files).
- Type R[space][message#] to read one message.
  You can chain several message#, seperated by a space.
- Type RM to read ALL messages adressed to you [Read Mine].
- Type RN to read all NEW messages to you [Read New].
- Type RU to read all UNREAD messages (status N) to or from you.
- Type R< to read messages from a certain callsign.
- Type R> to read messages to a certain callsign.
@@ 14 REQDIR

REQDIR lets you "order" a list of available files from another BBS.
Then, later, you can "order" one of those files with REQFIL.  Type
? REQFIL for more info on the REQFIL-server.

If you want to see which files are in the root-directory of LA1B BBS, and
your own BBS if F6FBB, you send a message like this:
SP REQDIR @ LA1B
As subject you write 
*.* @ F6FBB  (if F6FBB is your home-BBS)
The message can be empty, a CTRL-Z or /EX is enough.

After some time, when the message has had time to be forwarded to 
LA1B BBS, you will receive a message here in F6FBB BBS containing a list
of files available in the root-directory of LA1B BBS.

If you want to look in one sub-directory ( <DIR> ), you can do this in a
similar way.  Example:  If you want to look in the LOKALT-directory at 
LA1B, you send a message like this:
SP REQDIR @ LA1B
As subject you type
LOKALT/*.* @ F6FBB  (if F6FBB is your home-BBS).

Beware:  Not all BBS-types support REQDIR.  FBB and MBL-type BBSs do...

@@ 14 REQFIL

REQFIL lets you "order" a file from another BBS.  Only ASCII-files,
binary-files cannot be sent to you with REQFIL.
A list of available files can be obtained using the REQDIR-server.

If you want to order a file from the root-directory of LA1B BBS,
and your home-BBS is F6FBB, you send a message like this:
SP REQFIL @ LA1B
As subject you type the name of the requested file, followed by a @-sign
and your home-BBS.  Like this:
NORSK.MAN @ F6FBB              (if F6FBB is your home-BBS).
The message can be empty, a CTRL-Z or /EX is enough.

After some time, when the message have had time to be forwarded to 
LA1B BBS, you will receive a message here in F6FBB BBS containing the
requested file.

If you want to order a file from a sub-directory, ( <DIR> ), you do
this is in a similar way.  Example:  If you want to order the file
TEST.TST in sub-dir called LOKALT, you type:
SP REQFIL @ LA1B
As subject you type:
LOKALT/TEST.TST @ F6FBB   (if F6FBB is your home-BBS)

Beware:  Not all BBS-types support REQFIL.  FBB and MBL-type BBSs do...

@@ 14 S|SB|SR|SC|SP|SC

S-command lets you send messages.
- Type S[type][space][callsign] to send a message.
  Type can be P for Personal or B for Bulletin.
- Type S[type][space][callsign] @ [callsign] to send a message to a
  station at another BBS.
- Type SB ALL to send a bulletin to ALL.
- Type SR[space][messages#] to reply to a special message.  (Send Reply).
- Type SC[space][messages#][space][callsign] to send a copy of a message
  to another callsign. (Send Copy).  You can write a message before
  sending the CTRL-Z, then the copy will be appended to your text.  If 
  you don't want to do this, just send CTRL-Z instead of any text.

@@ 14 SYS

  Only for sysops.  Use the SYS-command to become a remote-sysops.

@@ 14 SYSOP

These commands are available for sysop (local and remote):

DOS               :  SYSOP can now run DOS-programs from remote.  Read the
                     help for this under FBBDOS with command ? DOS.
DU [callsign]     :  Show info on that callsign.
DB                :  List all callsigns defined as BBS.
DE                :  List all excluded callsigns.
DS                :  List all sysops.
DX                :  List all "expert"-users.
DP                :  List all users that have paging on.
E [msg#]          :  Edit a message#.
EU [callsign]     :  Edit one user.  A '.' deletes a field.
FA [msg#] [BBS]   :  Mark message# for forward to BBS.
FB (BBS)          :  List messages that will be forwarded to BBS.  The 
                     messages are listed as with a standard L-command with
                     BIDs (M-command).
FC (BBS)          :  Shows the route a message from me to BBS will take.  If
                     I send FC LA2D, and the BBS respond with LA8D, it means
                     that messages from me to @LA2D, will be sent via LA8D.
FD [msg#] [BBS]   :  Remove message# from forward to BBS.
FL [BBS]          :  List messages that will be forwarded to BBS.
FT [BBS]          :  List size of messages ready for forward to BBS.  Shows
                     number of personal messages and bulletins, and also the
                     total size in kilobytes.
FT                :  FT alone shows the same as above, but for ALL BBSs that
                     there pending forwards to.
FU [number]       :  To disconnect a user from a channel.  Channel-number 
                     must be used, not callsign.
##############################################################################
# New in FBB 5.13e                     
FV                :  Start forward-scan.
##############################################################################
FN [messsage#]    :  List BBSs waiting for a message.
FW [argument]     :  Start forward to BBS (callsign) or port.  
                     FW 9 starts forward out on all ports.  FW LA1B starts
                     forward to LA1B.
FS [argument]     :  Stop forward.  Argument; look under FW.
FR [argument]     :  Start revers forward.  Argument; look under FW.    
##############################################################################
# New in 5.14c:
H (argument)      :  Hold messages, give them H-status.
##############################################################################

$$ [message#]      :  Same as FN.
K [message#]      :  From version 5.10i sysop can also kill UNREAD messages.
KF                :  Kill all messages that have been forwarded.
KK [message#]     :  Kill message.  Goes directly to status A, and is 
                     deleted with next EPURMESS.
K> [callsign] 
K< [callsign]     :  SYSOP can kill messages to or from a callsign.
K@ [BBS]          :  Kill all messages to this @BBS-route.
############################################################################
# New in 5.13e:
LABEL (filename)  :  To change the description of a file in FBBDOS.
############################################################################
############################################################################
# New in 5.14c:
N (callsign)     :  To change a user's data in USER-DATA.
############################################################################


NB:  All K-commands can be preceded by an extra K.  Messages will then go
     directly to A-status (not K).  Example:  KKM

LU                :  List all UNREAD messages (status N) in the BBS.
M (replace L)     :  Can be used by sysop to replace L, like:
                     ML for LL, M 100- for L 100- etc.  All listings will
                     then have the BID in the subject-field.
##############################################################################
# Changed in 5.13f:                     
M [msg#] [file]   :  Copy a message to a file.  Overwrites existing file.
MH [msg#] [file]  :  Like M, but with same format as R [msg#].  Overwrites.
MV [msg#] [file]  :  Like M, but with same format as V [msg#].  Overwrites.
MA [msg#] [file]  :  Copy a message to a file.  Appends to existing file.
MHA [msg#] [file] :  Like M, but with same format as R [msg#].  Appends.
MVA [msg#] [file] :  Like M, but with same format as V [msg#].  Appends.
#############################################################################
PR                :  Toggle printer on/off.  CAREFUL when doing this remote
##############################################################################
# New in 5.14c:
RE                :  REview messages with status Hold.
##############################################################################
RU                :  Read all UNREAD messages in the BBS.
SYS               :  Send this command to become remote-sysop.
S [filename]      :  Send an ASCII file in GATEWAY-mode.  Must go to command-
                     mode first (by pressing ESC).
#############################################################################
# New in 5.13f:
W (filename)      :  To be used under GATEWAY to capture text in a file.  You
                     must first change to Cmd:mode.  End capture with W.
#############################################################################
YL [filename]     :  Change the label of a YAPP-file.
YZ [filename]     :  Delete a YAPP-file.
YU [filename]     :  Send a binary file in GATEWAY-mode.  Must go to command-
                     mode first (by pressing ESC).
YD [filename]     :  Receive a binary file in GATEWAY-mode.  Must go to 
                     command- mode first (by pressing ESC).
                            
%                 :  Show status for all channels right now.
/R                :  Reboot PC.
/A                :  Stops the BBS-program

@@ 14 T|TALK

T-command calls the BBS System Operator (SysOp).
If SysOp IS available to chat, you'll get a response within ONE MINUTE.
Otherwise, the BBS will advise you that SysOp did not answer.  You will be
returned to the command prompt and can continue normally.


@@ 14 U|UPLOAD

U-command can be used to upload an ASCII-file to the "root"-directory of 
the FBBDOS.  - Type U [filename] to send the ASCII-file.
You can also use U-command to upload a file to a sub-directory of FBBDOS, 
like this:
U VHF/TEST.RES

@@ 14 V|VERSION|VERBOSE|VM|VN

The V-command shows you the specific version of this PBBS, the date
of the software release and the copyright notice.  This also shows the
number of active messages and the next message number.
- Type V to see this PBBS's software version.

The V-command also lets you READ MESSAGES with a verbose listing,
including the message routing.  Use like R-commands.

- Type V[space][message#] to READ a specific message.
  You may have several message numbers per line.
- Type VM to READ ALL messages addressed to YOU [Read Mine].
- Type VN to READ ALL NEW messages addressed to YOU [Read New].
- To READ msgs #313 and #325 type "V 313 325".  Don't forget SPACE.

@@ 14 W

Use the W-command (alone) to get a list of files in the users root-directory.
Use the W-command with path to see what is in the sub-directories, like this:
W LOCAL           (see what is in the LOCAL sub-directory)

@@ 14 WILDCARDS|@|?|#|=|*

Following "wildcards" er allowed:

@ replace one letter
? replace one alfanumeric character (A-Z, a-z and 0-9)
# replace one digit
= replace any character, except space
* replace any string of characters

@@ 14 X|EXPERT

The X-command toggles your status between "normal" and "eXpert" user.
"Normal" mode gives you complete prompts and standard messages.
"eXpert" mode gives you a very short command line and nothing else.
- Type X to toggle your status between "normal" and "eXpert".

@@ 14 Y|YAPP|YW|YI|YN|YU|YD|YZ

The Y-command calls YAPP protocol for binary file transfer.

Your software must use YAPP protocol to transfer binary files.

- Type YW to list directory of binary files.
- Type YI to list directory with labels.
- Type YN to list directory of new binary files since your last logon.
- Type YU [filename] to send a file TO the BBS. You can't replace an 
  existing file.
- Type YD [filename] to receive a file FROM the BBS.
- Type YZ [filename] to delete a file from the BBS.

############################################################################
# New in FBB 5.13f:
@@ 14 Z

Use Z-command to for delete files in the BBS from BBS-mode.
Type Z [filname] to delete the file.  
############################################################################

@@ 14 +|APPEND

- Only for sysops.  Use this to append a file after the message, like this:
  SP [call] @ [bbs] + [filename and path]
  Example:
  SP LA6CU @ LA1B + c:\lokalt\lokal.inf
  Here the file LOKAL.INF vil be appended behind the message when you
  type CTRL-Z.
  
@@ 14 >

- Send    > [callsign] [text]   to send a text to another station that also
  is connected to the BBS.  Get an overview of connected stations with
  the !-command.
  
@@ 14 =

- Send = [callsign] to connect to another station that also is connected
  to the BBS.  Get an overview of connected stations with the !-command.
  
@@ 14 !

- This command is similar to the I-command, but in a shorter form.

@@ 14 $$

Only for sysops: $$ [message#] gives a list of all BBSs that the message
                  has been forwarded to, or waiting to be forwarded to.
                  
@@ 14 %

Use this command to see the status of all channels in the BBS right now.

@@ 16 H

Gateway-commands :

C : Connect.
D : Disconnect.
H : Help (this text).
J : List of the last 20 monitored stations.
K : Converse mode.
M : Monitor on/off.
P : Go directly from one port to another.  Send P1 to go from current port
    to port 1.
Q : Return to BBS-mode.

> or ESC to go back to Cmd:-mode.


First, you get an available port. If a link is not busy, it will be assigned
and take your callsign. The mode will automatically change to converse when
connecting your correspondent. The K command also changes to converse mode.
You will return to command mode when disconnecting, or with Esc or > followed
by a <return>. The C command must be followed by a callsign, and if necessary
by the V and a list of repeaters.
C callsign V digi1 digi2 ...

Monitor the port with the M-command

###########################################################################
# New texts for gateway-help in FBB 5.13f: @@ 16 B - @@ 16 >

@@ 16 B|Q

Send Q to return to BBS-mode.  If you are connected to a station via the
gateway, the other station will be disconnected.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 C 

Send C (callsign) to connect to a station via the gateway.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 D 

Send D to disconnect a station via the gateway.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 J 

Send J to list the last 20 monitored stations.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 K

Send K to enter CONVERS mode.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 M

Send M to toggle monitoring via gateway on/off.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 P

Send P (port-number) to go directly from one port to another.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)

@@ 16 >

Send > (or press ESC) and press ENTER to go to Cmd:mode.

(All commands in gateway-mode must be sent in Cmd:mode.  Enter Cmd:mode by
sending a > (or press ESC) and press ENTER.)
###########################################################################
